Trailer Side
8" tall adjustable height channel bracket. This can be used with Lock N Roll PNs 502 or 503 or any other manufacturer's equipment. The inside width of the channel is 3-1/16". Bracket material is High Strength/Low Alloy ASTM A572 Grade 50. There are 4 sets of holes allowing for 3-positions. Bracket is welded to a 2" sq x 1/4" thick wall x 7-3/8" long tube. Tubing is high quality ASTM A500 with a minimum tensile strength of 58,000 PSI and 23% elongation. The maximum height adjustment when used with PN 503 is 5-1/2" measured from the center of the receiver tube to the center of the Lock N Roll coupling shaft on your trailer.
$67.00
This vehicle side option of the Lock N Roll trailer hitch uses the same pad-eye forging as our PN508 and can be welded directly to trailer a tongue or custom brackets. The base of the pad-eye is 3" x 2-9/16" Unit is not painted so as to not interfere with welding. This hitch is rated at 11,000 pounds gross trailer weight and 1100 pounds tongue weight. Coupling shaft is heat-treated 4340 chrome-nickel-molybdenum alloy steel. Bolt is high strength alloy made by Bowmalloy. All units exceed the requirements of SAE standard J684 and are tested by an independent lab.
$128.00
8" tall adjustable height channel bracket, 3-position bracket, with 4" of vertical adjustment. Uses 5/8” bolts. Inside of channel is 3-1/16" wide. Material is ASTM 572 GR 50. This can be welded onto your trailer tongue or custom bracket and used with Lock N Roll PNs 502 or 503 or other manufacturers equipment.
$24.00
